1 hr. fitting the skins on the rudder.  The holes in the two ribs that hold the stiffener are missing, so much of the time was getting that lined up so I can drill those holes.

View inside the rudder with one side cleco'ed.

Positioning the stiffener so can drill the holes in the ribs to hold it. 

Making sure it all fits.  There's a twist on the trailing edge, so when I do the final fit I'll want to try and finagle it to remove the twist.  Should be interesting to see how much play there is... 

 Cleco'ing the two skins together on the "leading edge" of the rudder.