2 hrs yesterday priming (yay!!) and 2.5 hrs today assembling 2 sets of wing ribs.

Finally a day I could be outside to do priming!

Note the side things are riveted from.  The instructions indicate this.

Angled as per the instructions.  Note that you can use the wrong part (e.g. left for right side) and get this wrong.

It was a little tricky to get the bushing and outside half of the bracket in once the first half was riveted.  But, if you bring the bushing and bracket in from the side and rotate it around you can get it assembled.  Note on second photo there are holes in the plate that have no matching holes in the rib - need to check on this.

Wing parts!