2 hrs. working on center fuselage soundproofing.

Updated my Paint Scheme page with my selected paint scheme. ;-)

The inside skin is off..

Had to rivet in the stick supports first.

Starting to cut the soundproofing (1/4" thick) to size.

Clamped down to get it to stay in place while I cut.

Placed a ruler down to demarcate the line to be cut.

Cut with an Exacto blade.

Pulled off the backing and put it in place.  Not so bad!

More pieces in place.

My special technique. ;-)

2 hours later and this much is done.  Center strip still needs to be done.