2 hrs. drilling out seat rails and fabricating a backing plate for the transponder blade.

Just test fitting some covering skins.

This line of holes on ANG-050 (4 pieces), seat locking rail, need to be drilled out to 8mm.

Drill baby drill! ;-)

One angle done.

All done!

Time to fabricate a backing plate.

First large piece.

Slots to accommodate the rivets already there.

 A smaller piece underneath to account for the thickness of the rib flanges.

Then on top is the wacky shaped piece that will be riveted to the rib.  I'm gluing together the pieces tonight and tomorrow I'll rivet it in place.  Then it will be time to properly place the mounting holes.  That blade will not move.