2.5 hrs. finishing up the fuselage wiring/tubing.  Other than properly tying down the wires, etc. through the center console area, ALL the wiring and tubing is done through the fuselage!!

Time to sever the left wing wiring.

And to cut off the pitot tubing...

All done including the pitot heat wires.

Routed through the main spar, covered up and tied down.

Back-side view where it will exit the side skin to the wing.

I'm going to remove those crossbars I put in and lay the bundles down on the bottom to give more clearance with the rudder cables.

Crosby sleeping through all the excitement. ;-)