Inspired by a post in the Sling Builders Facebook group (you're a member, right?) I decided to work on the holes for the step. Here are the 5 holes on the bottom for the step reamed out to 4mm (it will use stainless steel rivets).
And here are the 4 holes on the side also reamed out to 4mm.
I was alerted by Jim that the belt is likely not oriented correctly on the reel for our application. You can actually see this in relation to the manual on close inspection. Compare the photo near the reel with the actual reel and anchor in my hand. Flipped... So, when I re-thread the belt onto the reel I will flip it.
No comments:
Post a Comment