My right rear top skin has a rogue rivet hole... The left skin underneath has a correctly placed hole.
I'll drill out where the other hole is...
Put a rivet in the right place and I will fill that rogue hole when I'm filling rivet heads.
Time to upsize this line of holes from that first un-pulled rivet back.
Done except for the holes at the back that will need to be drilled through. I'll probably add a few in-between rivets for strength. All those upsized rivets will be covered by a fairing.
This middle line rivets was upsized to match the other side which required upsizing.
No comments:
Post a Comment