4.5 hrs. putting the right wing on the shelf and cleco'ing together the left wing. :-)

And the right wing is up on the shelf.  Easy!

Time to put together the rear spar for the left wing.

And it's done!!

The jigs in place and the rear spar attached.

Got the main spar attached (with some help), leveled the jigs and cleco'ed all the ribs in place.  Nice!

NEXT SESSIONS:

1. In riveting the rear spar I inadvertently riveted where one of the ribs goes, so I need to drill out those 4 rivets.
2. Rivet landing light pieces.
3. Test fit of the top skins for fit, levelness and squareness of the spars/jigs.
4. Bolt down jigs after checking level again.
5. Flip assembly.
6. Test fit of bottom skins (don't forget stringer!) for fit and levelness.
7. Test fit of pitot assembly.
8. Flip assembly.
9. Remove top skins and rivet ribs.
10. Flip assembly.
11. Rivet bottom skins.
12. Flip...
13. Wiring in.
14. Air lines in.
15. ...